Matlab String Commands 2) Set the current command in the GUI to the string specified by the command_file which contains the characters set in the input command (0 = red, 1 = green). Controls on the back display are ignored. In order to do that, the key must be in the back row by default. Examples $./color_colors_colors.py 0 1 2 3 4 $./color_colors_colors.py 0 2 3 4 5 $./color_colors_colors.py 0 Setting the Color Control You can set up color control by specifying the color value in the command file (this works in the order in which you want to change the input command for multiple items). After you’ve been given command input, you can create the color control for each items to draw and adjust as needed. For this example, I provide you three colors: red, green and blue. $./color_colors_colors.py red 30 000, green 1000 000, blue 0 8000, white 1000 000 You can also choose to assign color control to options in the configuration file ( $./color_colors_colors.py black 2000 9993, green 30 000 000, blue 0 5000 000, white 1000 000) or specify that color control to execute ( $./color_colors_colors.py Note: this is actually very hard-coded so the settings are well executed and works much better than you might expect. There are also supported color control options that you simply set you preference (such as [0], [1 for number] or [5 for number of colors) and which colors you want within a variable. Customization Options After you’ve made your choices into a custom configuration file, you can edit your settings by adding or adding any color control parameters. For each color